Aftermarket Parts

 

Thru-Tube Mounting Connection Kit
The Thru Tube Mounting Connection Kit consists of a stainless steel nipple with air inlet holes and two special EPDM rubber gaskets. The gaskets provide a seal and also serve as a bushing to hold the assembly in the center of the air piping. The stainless steel nipple joins the two diffusers to complete the connection. The kit is designed to mount T-Series diffusers to square or rectangular air piping. Reference the diffusers in the T-Series section to select the proper diffuser for your application. Call for part number and pricing. Specify the air piping cross section dimension as well as the diameter of the outlet holes.

Related Products

EDI FlexAir® Pro Magnum Fine Bubble Flexible Membrane Diffuser

• Efficient geometry supports high-density installations of over 65% floor coverage
• Non-buoyant design for reduced uplift and stress on mounting
connection
• Premium quality membranes available in EPDM, PTFE, Silicone,
Polyurethane, and Matrix PLUS™ for reduced fouling and
minimum maintenance
• Non-metallic design available for highly corrosive applications
• Backflow protection with triple check-valve
• Ideal for intermittent aeration

EDI FlexAir® Pro MiniPanel Diffuser

MiniPanel Systems deliver lower total energy cost in most applications. They are heat resistant, have air flow ranges, use EDI membranes, are configurable with retrievable options. FlexAir Pro MiniPanel units can be mounted on any type of a pipe, plastic or metal. These choices of materials are an engineering benefit for use by the engineer or owner.

FlexAir™ MiniPanel Diffuser Membrane

MiniPanel Systems deliver lower total energy cost in most applications. They are Heat resistance, have air flow ranges, use EDI membranes, are configurable with retrievable options. EDI MiniPanel units can be mounted on any type of a pipe, plastic or metal. These choices of materials are an engineering benefit for use by the engineer or owner.

EDI FlexAir® Pro Magnum Diffuser Membrane

• Efficient geometry supports high-density installations of over 65% floor coverage
• Non-buoyant design for reduced uplift and stress on mounting
connection
• Premium quality membranes available in EPDM, PTFE, Silicone,
Polyurethane, and Matrix PLUS™ for reduced fouling and
minimum maintenance
• Non-metallic design available for highly corrosive applications
• Backflow protection with triple check-valve
• Ideal for intermittent aeration

EDI FlexAir® Pro Threaded Disc Diffuser

The FlexAir® Pro threaded disc diffuser is a fine pore flexible membrane or ceramic media diffuser that provides operational flexibility with maximum oxygen transfer efficiency. For ease of installation and maintenance, EDI’s disc diffusers offer two connection methods: threaded and integrated saddle mount. The threaded disc diffuser can be installed in any 3/4-inch fitting or pipe nipple. Pipe with wall thickness equal to or greater than SCH40 can be drilled and tapped for connecting the diffuser. Additionally, diffusers can be installed using UDM (see “Specialty Disc Diffuser Items”) when using thinner wall pipe for air distribution.