Aftermarket Parts

 

T-Series Diffuser
The FlexAir™ T-Series diffuser unit is a fine pore, flexible membrane diffuser capable of providing a high level of oxygen transfer efficiency with maximum operating flexibility. T-Series units are configured with a premium quality EPDM rubber membrane sleeve specifically perforated for high volumetric air-handling capacity. For industrial and non-standard domestic applications, alternate membrane materials including urethane, silicone, and other specialty polymers are available. Alternate perforation patterns are available for energy sensitive applications or where maximum oxygen transfer efficiency is desired. EDI also offers a variety of sizes of diffusers to meet airflow requirements.

Related Products

EDI FlexAir® Pro Magnum Fine Bubble Flexible Membrane Diffuser

• Efficient geometry supports high-density installations of over 65% floor coverage
• Non-buoyant design for reduced uplift and stress on mounting
connection
• Premium quality membranes available in EPDM, PTFE, Silicone,
Polyurethane, and Matrix PLUS™ for reduced fouling and
minimum maintenance
• Non-metallic design available for highly corrosive applications
• Backflow protection with triple check-valve
• Ideal for intermittent aeration

EDI FlexAir® Pro MiniPanel Diffuser

MiniPanel Systems deliver lower total energy cost in most applications. They are heat resistant, have air flow ranges, use EDI membranes, are configurable with retrievable options. FlexAir Pro MiniPanel units can be mounted on any type of a pipe, plastic or metal. These choices of materials are an engineering benefit for use by the engineer or owner.

FlexAir™ MiniPanel Diffuser Membrane

MiniPanel Systems deliver lower total energy cost in most applications. They are Heat resistance, have air flow ranges, use EDI membranes, are configurable with retrievable options. EDI MiniPanel units can be mounted on any type of a pipe, plastic or metal. These choices of materials are an engineering benefit for use by the engineer or owner.

EDI FlexAir® Pro Magnum Diffuser Membrane

• Efficient geometry supports high-density installations of over 65% floor coverage
• Non-buoyant design for reduced uplift and stress on mounting
connection
• Premium quality membranes available in EPDM, PTFE, Silicone,
Polyurethane, and Matrix PLUS™ for reduced fouling and
minimum maintenance
• Non-metallic design available for highly corrosive applications
• Backflow protection with triple check-valve
• Ideal for intermittent aeration

EDI FlexAir® Pro Threaded Disc Diffuser

The FlexAir® Pro threaded disc diffuser is a fine pore flexible membrane or ceramic media diffuser that provides operational flexibility with maximum oxygen transfer efficiency. For ease of installation and maintenance, EDI’s disc diffusers offer two connection methods: threaded and integrated saddle mount. The threaded disc diffuser can be installed in any 3/4-inch fitting or pipe nipple. Pipe with wall thickness equal to or greater than SCH40 can be drilled and tapped for connecting the diffuser. Additionally, diffusers can be installed using UDM (see “Specialty Disc Diffuser Items”) when using thinner wall pipe for air distribution.